|
|

 |
Orion1 based Nx64-to-E1 converters:
-
Orion1 series can be used as Nx64-to-E1
converter
-
Offers
120Ohm or 75Ohm BNC interfaces
-
Console,
Telnet and SNMP management
-
Subrack and minirack form factors
-
Extended
temperature range
-
High
quality and high performance
Orion2 based Ethernet-to-E1 converters:
- Orion2 series can be used
as Ethernet-to-E1 converter
- Orion2 has up to
4xEthernet and 4xE1
- Supports
G.703 and G.704
- Supports
VLAN (IEEE 802.1q)
- Console,
Telnet and SNMP management
- Tabletop,
subrack and minirack form factors
- Extended
temperature range
- High
quality and high performance
Single port table top V.35-to-E1 converter:
- Interface
conversion between E1 and V.35
- Supports
G.703 and G.704
- Offers
120Ohm RJ45 and 75Ohm BNC interfaces
- LED
indicators for PWR, SYN, BPV, LINK/ACT and 10/100
- Synchronous
transmission from 64 to 2048kbps
- PCM30
or PCM31 frame format supported
- Management
via front panel LCD screen or console port
- Firmware
upgradeable via console port
Single port table top Ethernet-to-E1 converter:
- Interface
conversion between E1 and Ethernet (10/100BT)
- Supports
G.703 and G.704
- Offers
120Ohm RJ45 and 75Ohm BNC interfaces
- LED
indicators for PWR, SYN, BPV, LINK/ACT and 10/100
- E1
line rate from 64 to 2048kbps in 64k steps
- PCM30
or PCM31 frame format supported
- Management
via front panel LCD screen or console port
- Firmware
upgradeable via console port
- LAN/LAN
interconnection via E1 network
- Supports
VLAN (IEEE 802.1q)
The FlexCON converter family offers
beside the Orion1 and Orion2 modems also simple and
cost effective single-port interface converters between TDM and Ethernet
networks or serial interfaces. It can convert from Ethernet or V.35 user data to
E1 (G.703/G.704), which is often offered by incumbent carriers and
telecommunication operators.
Orion2 and Orion2+ downloads:
FlexCON Brochure
Corresponding downloads:
Orion1&2
Management Description
Orion2 / 2+
Configuration as Converter Ethernet to E1
Orion2
transmits Ethernet + Fractional E1 (FE1) over an E1 network |